KT-D12 PAS Sensor E-Bike Pedal Assist Sensor (PAS) D-12 Clip-On 12 Magnet £12.00

PAS V-12 Pedal Assist Sensor with 12 Magnets for E-Bikes

£12.00

PAS V-12 Pedal Assist Sensor with 12 Magnets for E-Bikes

This two-part sensor system includes a magnet wheel that mounts on the bottom bracket crank arm and a sensor that attaches to the bike’s seat tube. The magnet wheel’s 12 magnets ensure precise pedal detection for smooth, natural motor assist. Easy to install with a 180mm cable and waterproof 3-pin Higo connector, it’s compatible with a wide range of e-bike systems. Optimal sensor-to-magnet gap is 3mm for reliable performance.

10 in stock

BEFORE ORDERING CONTACT US IF YOU HAVE ANY COMPATABILITY QUESTIONS

PAYPAL ACCOUNT NOT REQUIRED TO ORDER

Support small, independent UK business

  • Actual UK stock
  • Quality packaging – either biodegradeable or re-used packaging
  • Excellent customer service
  • UK tax paid, unlike Amazon
Payment Options

PAS V-12 Pedal Assist Sensor with 12 Magnets for E-Bikes – Precise, Smooth, and Easy to Install

This pedal assist sensor (PAS) system comes in two parts. The magnet wheel attaches to the exposed part of the bottom bracket where the crank arm connects, while the sensor mounts securely on the bike’s seat tube. As the magnet wheel passes close to the sensor, it sends signals to the controller to provide smooth motor assistance, ensuring a natural pedal feel.

Featuring 12 magnets on the disc, this PAS sensor delivers precise pedal detection and reliable performance across a wide range of e-bike systems.

KEY FEATURES

  • 12-magnet wheel for accurate pedal rotation detection

  • Provides smooth, natural motor assist response

  • Compatible with most e-bike controllers and systems

  • Easy installation with clear mounting locations

  • Waterproof 3 Pin Higo connector for secure, reliable connections

SPECIFICATIONS

  • Cable Length (to connector end): 180mm

  • Weight: 40g

  • Magnet Disc Dimensions: 79mm diameter, 4mm thick

  • Connector Type: 3 Pin Higo Waterproof

IMPORTANT NOTES

  • Ensure sensor alignment is correct: the gap between the sensor and magnets should not exceed 3mm for optimal performance.

  • Designed to mount on the left-hand (non-drive side) of the cranks.

  • These are compatible with all the Bafang controllers we sell on this site. If you plan to use it with a different controller make sure to check the pinout in the product photos, to ensure it is the same specification that you require.
SKU: 1004 Category: